Get out of the corner fast and maximize your pulling power on the straights! Designed for all out Race Competition, Drivers Education, PCA club racing, track events, and off-road use. Fabspeed Motorsport 987.2 DFI Porsche long tube headers with Formula 1/ Indy car style high velocity spiked merge collectors provide maximum exhaust flow from the engine cylinder heads straight into equal length primary header tubes and a INDY Car F1 merge collector The Fabspeed Motorsport race competition Porsche 987.2 headers are the Worlds Very Finest Race Competition headers Dyno developed and independently Dyno proven by Porsche Engine builders and Racers world wide. In back to Back independent Dyno testing Fabspeed racing headers outperform "Blow Away" the competition. Caveat Emptor. Fabspeed headers are chosen for 3.8liter to 4.0 liter custom build engines too.
Fabspeed's Race Headers for the Porsche 987.2 Boxster/Cayman are built to optimize the engine's exhaust flow for maximum performance. Our precision-engineered headers add significant horsepower and torque to the wheels. Fabspeed Motorsport Boxster/Cayman headers have been developed and refined over 17 years and used by Professional Racers and IMSA Sanctioning bodies for over decades. You can NOT buy a finer race header developed in USA from a clean sheet of paper.
Set yourself apart from the factory-equipped crowd with these unbeatable performance upgrades and watch your Porsche's power - and your race results - climb. Race headers are a great foundation for any Boxster Spyder Cayman R or 3.8 liter / 4.0 liter engine build. Fabspeed headers work great with Boxsters/ Caymans with PSE too.
Fits all Porsche 987.2 Boxster/Cayman/ Spyder, Cayman R vehicles, 3.8 liter cars too.
Equal length T304 stainless steel, C.N.C. mandrel bent header pipes for equalized engine pulsing, exhaust scavenging and maximum exhaust flow.
Long-tube race headers fit all Boxster/Cayman models listed above and are a simple direct BOLT-ON to any OEM 987.2 muffler/ 987.2 PSE or any aftermarket muffler designed from OEM spec.
Dramatic improvement in horsepower and torque throughout the RPM range
Multi-layer OEM Porsche exhaust manifold gasket additional $70 set.
F1/NASCAR style high velocity cast merge collectors to pulse wave tuning.
Direct bolt-on application with no cutting or welding required.
Fabspeed Motorsport USA over 25 years of design, engineering Excellence. Innovation not Imitation.
100% INTENDED for RACING COMPETITION events ONLY. Never ever to be driven or used on the public roads under any circumstances. Caveat Emptor.
Optional 02 Spacers CATTED SPACERS available to minimize C.E.L occurrences .
All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty. Race track Racing encourage and covered under warranty.
Read about MotoIQ's 987.2 Cayman S track build that used these headers!
INSTALLATION NOTE: To ensure proper header seal, after initial heat cycle, tighten all exhaust bolts to the OEM torque specs.
DISCLAIMER: This product removes the OEM catalytic converters from the vehicle, and as such, is strictly intended for closed track events and off-road use only. This product is or contains a Racing Cat Bypass Pipe, which will give you check engine lights on OBD2 cars. We suggest pairing this product with racing software to prevent fault codes and check engine lights. Racing Cat Bypass Pipes are solely intended for track and race cars as they are NOT California Air Resources Board Certified and not EPA certified. You are hereby informed and warned to check your local, state, and federals laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts.
100% INTENDED for RACING COMPETITION events ONLY. Never ever to be driven or used on the public roads under any circumstances. NOT CARB approved NOT EPA approved and never will be approved. Caveat Emptor.
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.