The X3M / X4M intake setup from BMW although awkward at first sight, is a very well designed system in the given space available. The flow path from the filters to the turbo inlets is very direct and does not change direction as abruptly as the usual OEM...

Made from prepreg carbon fiber and kevlar – this engine cover is a direct replacement for the Audi C8 RS6 plastic engine cover. Available in both Gloss and Matte finish. NOTE: Installed photos also show our intake system available separately...

The BMW M2/M3/M4 is one of the flagship vehicles from the Munich stables and so deserves to have an engine bay that looks as good as it performs. With the OEM cover leaving the engine bay looking unfinished, Eventuri redesigned it to bring much needed...

Presenting the perfect addition to our F90 M5 intake system to optimize the flow path all the way to the turbos. Our carbon inlets have a larger volume than the stock inlets by maintaining a larger diameter all the way to the turbos. The stock inlets...

100% Prepreg carbon fibre - the air scoop forces ambient air directly into the filter opening. This scoop mounts behind the front kidney grilles and effectively saturates the mouth of the intake with cold air. Upgrade your stock airbox by pairing the...

For customers who already own the G8X Eventuri V1 Carbon Intake System and want to install the CSL strut brace. Intake System Installation Guide Retrofit kit consists of: Main Carbon Intake Tube Left-Side Intake Housing without Filter

The X3 M40i Eventuri intake has been developed to provide the turbo with a less restrictive flow path whilst maintaining low inlet temperatures. In the M40i, the intake system’s proximity to the exhaust manifold poses a challenge, rapidly heating...

Introducing our Lotus Emira V6 Supercharged intake. This intake is the result of extensive R&D and testing to improve on the flow path of the stock system. Our system is a complete redesign of the stock airbox with the aim of reducing the resistance...

Are you disappointed in the current universal valved muffler offerings? Valves rattling and/or breaking? Poor sound quality?  Introducing the World highest quality universal valved muffler, complete with electronic valves that are guaranteed not to...

Introducing our cold air scoops for the G8x M3 and M4 platform. Fitment for all G8x M3 and M4 vehicles with both stock and CSL grills. These scoops are designed to direct ambient air into the feeds for the intake system helping to maintain consistent...

Premium Carbon fiber aero disc wheel covers for the Porsche 992 GT3. These are meant to improve the airflow around the rear of the car and make your rear wing work a tiny bit better. Some say you can reduce the wing angle by 2...

CRC continues to lead the market in creating revolutionary products to improve performance and driving experiences. CRC Mass Air Flow Cleaner was the first item on the market specifically designed to clean the mass air flow (MAF) sensor in your car,...

Introducing our revised G8X M3 / M4 intake for fitment with the CSL Strut brace. We have carried out intensive R&D to develop an intake which not only improves on the stock M2/M3/M4 but also is future proof in its capacity to cater for high powered...

Premium Gilden Soft Style t-shirt printed with the Fabspeed Logo on the front and the Fabspeed Phoenix on back. TRULY the perfect gift for any Motorsport enthusiast.                        ...

The 991 Turbo Eventuri intake system was developed through extensive real world testing with the aim of allowing the turbos to work more efficiently. By replacing the single stock airbox with individual patented Venturi filter housings, the turbos are...

The Mercedes GLC63 intake system is the culmination of extensive development and testing. Our design brief consisted of 3 main objectives: 1) Increased flow rate. 2) Low intake temperatures. 3) Smooth airflow. The first objective was met by utilizing all...

Mercedes W205 C63S AMG - Carbon Fiber duct upgrade kit to change your V1 intake system to V2.  Note: Intake system not included ** This item is not eligible for return **

The Mercedes W205 C63S AMG intake system is the culmination of extensive development and testing. Our design brief consisted of 3 main objectives: 1) Increased flow rate. 2) Low intake temperatures. 3) Smooth airflow. The first objective was met by...

The F40 M135i, F44 M235i, F39 X2 35i Eventuri intake system was developed through extensive real world testing and airflow simulation analysis. It features our patented Venturi housing system with an integrated Mass Air Flow sensor section for the...

The E85 / E86 Z4M Eventuri intake system uses theri Patent Pending Carbon fibre Housing which provides an aerodynamically efficient airflow path from the filter to the MAF tube. Not just another cone filter with a heat shield but a unique design which...