null
close
close
215-646-4945

Open Monday - Friday

Fabspeed Porsche 997 / 997.2 GT3 RS Long Tube Race Competition Headers

No reviews yet Write a Review
$4,195.95
SKU:
FS.POR.997GT3.LTRHDR
Shipping:
Calculated at Checkout
HP (whp):
+34
TQ (ft/lbs):
+10
WT (lbs):
TBA
5 customers are viewing this product

Fabspeed Porsche 997 / 997.2 GT3 RS Long Tube Race Competition Headers

$4,195.95

PURCHASE DISCLAIMER: Fabspeed Motorsport does not condone the use of emission defeat devices for any vehicles used on public streets or roadways. Fabspeed Motorsport will not tamper, remove, disable, or bypass emissions equipment on a motor vehicle in accordance with 40 CFR Section 86.1854.12(a)(3), Clean Air Act 40 CFR 1068.101(b). This includes software, known as tunes, that reprogram a motor vehicles electronic control module to alter engine performance and enable the removal of filters, catalysts, and other critical emissions controls.

Designed for Competition and all out racing, track events and off-road use, Fabspeed Motorsport USA Long Tube Race Headers are engineered to maximize the horsepower and torque bolt-on potential of the Porsche 997 GT3 and 997.2 GT3 engine by increasing/scavenging exhaust flow and exhaust pulses from the flat 6 cylinder heads/ports straight into the exhaust system. This system was designed, incrementally Dyno developed and maximizes engine power all throughout the powerband.  Porsche Motorsport engineer builders and pre-eminent exhaust companies like BURNs Stainless LLC were consulted to design the Ultimate GT3 competition slip on header system in 321SS.                                                     

Additional engineering news and better quality for 997 GT3 Racers and drivers. Fabspeed Motorsport has worked with many of the very latest 991 GT3 CUP cars and 991.2 GT3 RS cars and a lot of the new cars engineering and breathing insights have been FOCUSED back onto continually improving our 997 GT3 systems across the board. Our engineering team immediately got back to work and adapted certain features our already highly regarded Long Tube Competition Race Header of the new 991.2 GT3 4.0L engine for the 997 GT3. There is no better designed and engineered race header system for the Porsche 997 GT3 available worldwide. All Fabspeed Motorsport Long Tube Race Headers are developed in conjunction with the racing engineers at Burns Stainless LLC Costa Mesa California. Burns Stainless is a World leader and innovator in stainless steel header design, testing and building high velocity merge collectors. The entire system is built from 321L stainless steel which has Titanium in the 321 alloy for maximum heat tolerance. 

FEATURES:

  • Fits all Porsche 997 GT3 / 997.2 GT3 / GT3 RS vehicles world wide and certain GT3 CUP race cars.  (2007- 2011)
  • Increases throttle response and dramatically improves sports car sound
  • CAD designed and incrementally Dynojet developed and tested for maximum performance gains. 
  • Simple bolt-on installation. Swap out stock Porsche OEM catted headers with Fabspeed. Simple easily removable and replaceable for emissions testing.
  • 100% INTENDED for RACING COMPETITION events ONLY. Never ever to be driven or used on the public roads under any circumstances. NOT CARB approved NOT EPA approved and never will be approved. Caveat Emptor.
  • Constructed from T321 stainless steel C.N.C. mandrel-bent tubing from our in-house Unison mandrel bender. Defense Aerospace quality CNC precision bending. 
  • Hand TIG welded and backpurged by skilled Fabspeed and Burns stainless skilled craftsmen with over 100 years combined experience.
  • All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty
  • Fabspeed Motorsport USA has the most experience with Porsche air-cooled and wasser-cooled GT3 cars. Innovation not Imitation. 
  • Track-use only systems not covered by the Sound solutions Warranty 

BURNS STAINLESS COLLECTORS:  Bringing our headers to an end are Burns Stainless Collectors which combine high flow and high velocity to increase and broaden an engine's torque curve. Our decision to utilize Burns Stainless slip on collectors was easy, their superior design and Burns stainless unparalleled 30 years of proven performance in Worldwide Motorsport Competition.

  • GT3 header system was engineered with Burns stainless proprietary X-design parametric engine/ exhaust design computer program. 
  • Completely hand finished inside for proper flow and maximum power gains
  • BURNS Stainless Cosa Mesa California- motorsport proven and chosen by NASCAR engine builders. Burns components have won world championships in Indycar Racing, Formula Atlantic, ALMS, FIA-GT, and Grand Am. Burns stainless is the very best!

INSTALLATION NOTE: To ensure proper header seal, after initial heat cycle, tighten all exhaust bolts to the OEM torque specs.

DISCLAIMER: This product removes the OEM catalytic converters from the vehicle, and as such, is strictly intended for closed track events and off-road use only, never to be driven on public roads. This product is or contains a Racing Cat Bypass Pipe, which will give you check engine lights on OBD2 cars. Racing Cat Bypass Pipes are solely intended for track and race cars as they are NOT California Air Resources Board Certified (CARB) and not EPA certified. You are hereby informed and warned to check your local, state, and federal laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts.

Returns Policy

To RETURN any system, product or merchandise you must contact us first for a Return Authorization (RA) Number. Special order and custom made systems, apparel, Carbon Fiber Wall Art, and other certain merchandise are NOT returnable. ALL SALES ARE FINAL. To return a Fabspeed Motorsport product an RA number must be requested and if granted the item(S) must be in original Fabspeed Motorsport sealed packaging. A copy of the original invoice and a brief explanation must accompany all returned items. You must follow our instructions for returning items carefully, or Fabspeed Motorsport reserves the right to charge a 25% restocking fee on any OPENED box or repackaged products. Customers are responsible for return shipping charges. If an order was shipped with a promotional “Free Shipping”, and the order is returned, we exclusively reserve the right to charge the customer or distributor for the cost of that original shipping and handling. If a Fabspeed Motorsport Performance package is ordered, and an individual component of that package is returned, Fabspeed Motorsport reserves the right to charge back the performance package discount along with any additionally offered discounts. Return shipped items DAMAGED in transit will RESULT in additional charges up to and including rejection of the competent. It is the customer’s responsibility to ship safely and properly. No returns accepted after 30 days from the invoice date. No credits will be given after 30 days from the invoice date.

To qualify for return, the product must be unused and remain in the original packaging, as well as match the current design and packaging for the product at the time of return. Sounds is subjective and therefore does not qualify for a return of a used product. See Sound Solution Guarantee to see if your product is covered.

Periodically mistakes are made when ordering, or a wrong part is shipped, and you may wish to return an item. We will do everything reasonable to satisfy you. Please contact Fabspeed Motorsport immediately via email at service@fabspeed.com to discuss the circumstances before returning any products. Anything returned without prior authorization from Fabspeed Motorsport will be refused. All returns must be sent back fully prepaid. Our customer service department (service@Fabspeed.com) will issue a Return Authorization Number, which must accompany any return. A copy of the original invoice and a brief explanation must accompany all returned items. No returns accepted after 30 days from the invoice date. No credits given after 30 days.

Shipping

Fabspeed Motorsport cannot be held liable for refusal of, delay of, loss of, theft or damage to a shipment of any item. The customer agrees to indemnify Fabspeed Motorsport for all costs, fees and expenses Fabspeed Motorsport incurs as a result of any violation of any local, state, federal, national or international laws or regulations. Customer agrees to take responsibility for lost packages that were not independently insured or sent without requiring signature. The customer understands they will be liable in the event of additional fees, tariffs, or legal issues such as border seizure. Customer accepts these risks and agrees to release Fabspeed Motorsport of all liability.

Fabspeed Motorsport reserves the right to charge a shipping and handling fee on every order being shipped from our facility. This fee is universal and applies to all retail and wholesale purchases and cannot be waived or credited.

A 6% sales tax will be implemented for every purchase made by a Pennsylvania resident. This fee will be charged for in-house installations and products purchased online, over the phone, and/or via email, this fee is required by law, is non-negotiable and non-refundable.