Upgrade the factory brakes or replace worn out rotors with premium GiroDisc brake rotors. Perfect for track use and a cost effective premium brake replacement solution vs PCCB.
The central hat section of each rotor is made from strictly U.S. sourced 6061-T6 aircraft specification aluminum. The disc is made from proprietary cast iron, poured in the USA and machined from start to finish in house at GiroDisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc. The larger rotors are greater heat sinks resulting in increased performance on the track, a reduction in brake fade, and improved brake component life.
The rotor and hat have a floating mount system, which utilizes 8 or 10 high strength alloy steel drive pins, manufactured by GiroDisc in the USA to our own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. The pins are secured by grade 12 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads.
Once the GiroDisc system is in place, simply replace the cast iron rotor when needed - contact us for replacements.
Fits all Porsche 991S vehicles (2012-2016) Do not fit base models.FEATURES
Lighter than stock brakes
Perfect solution for vehicles seeing track use - saving you from costly OE ceramic replacements
Caliper spacers are included to accommodate the larger front GiroDisc rotors
Direct factory replacement
Improved braking performance
Reduced unsprung weight
Increased rotor life
Greater cooling efficiency
Retains factory e-brake
Premium grade; made in U.S.A.
When converting from carbon ceramic brakes to GiroDisc iron rotors we STRONGLY recommend replacing all four rotors in order to maintain the factory brake bias and controlled braking in all driving conditions.
All I can say is WOW!!! These rotors are a night and day difference over the stocks for spirited driving and track use. Highly recommend!!!
Stop great, look great, lightweight, and Fabspeed was fast and prompt with their shipping and service! Can't wait for my first track day at NJMP coming up!