Purchase Disclaimer: Fabspeed Motorsport does not condone the use of emission defeat devices for any vehicles used on public streets or roadways. Fabspeed Motorsport will not tamper, remove, disable, or bypass emissions equipment on a motor vehicle in accordance with 40 CFR Section 86.1854.12(a)(3), Clean Air Act 40 CFR 1068.101(b). This includes software, known as tunes, that reprogram a motor vehicles electronic control module to alter engine performance and enable the removal of filters, catalysts, and other critical emissions controls.
Realize the full performance potential of the 981 Boxster and Cayman with full control at your fingertips. Enjoy the aggressive sound of a performance exhaust and switch back to a subtle street-worthy note at the push of a button.
With Fabspeed's full Porsche 981 Boxster & Cayman TrackTec Performance Package, you can increase horsepower and torque while shedding weight and adding full control to the volume of your exhaust.
From the headers to the exhaust tips, this complete performance package is the best combination of Porsche 981 Boxster and Porsche Cayman aftermarket exhaust and intake parts available. Fabspeed constructs all of its parts with extreme precision and tests the performance against OEM numbers to fine-tune the upgrades. We pair these fantastic Fabspeed products with intake and tuning upgrades from the best names in the business to bring you the ultimate Performance Package for your 981!
The TrackTec STREET Performance Package comes with the following products:
NOTE: For vehicles not equipped with Porsche Sport Exhaust (PSE) valves from the factory, a Fabspeed Valve Controller Kit is necessary to control the operation of the valves. Please choose the appropriate option when ordering. If you are unsure whether or not your car is equipped with PSE, take a look at your center console near the shift surround. If you have a button with an icon of two exhaust tips, then you have PSE. If you do not have this button, then you do not have PSE.
IPD Competition Plenum Details:
After a very extensive R&D program, we are proud to launch the new 981 IPD 82mm Competition Plenums specifically designed to work in perfect concert with the upgraded 82mm throttle body. This combination has proven to be extremely effective and deliver even more performance than doing either component on its own. This Competition Plenum package will work with both 3.4L "S" and 2.7L "Non-S" applications.
The 981 intake is nearly identical to the 987.2 intake. Porsche made a few upgrades with the 981, most notably being that the 981 draws outside air from both driver and passenger air intakes instead of the driver's side only as previously found with all 986, 987 and 987.2 applications. IPD has developed a custom silicone hose designed to perfectly fit the larger 82mm throttle body and considerably improve air flow.
The new 981 Plenums also benefits from the internal dimpling effect that we are now implementing on all future Plenums. This internal dimpling allows us to control the boundary layer and maximize air flow. Just like a dimpled golf ball travels farther than a smooth golf ball. Controlled turbulent air creates less friction and "tumbles" over a given area more efficiently.
Power gains with the 981 Competition Plenum are virtually the same as with the 987.2 Competition Plenum, putting down 14 horsepower and 12 foot pounds of torque at the wheels. The bulk of the power gains from the IPD Plenum begin around 4000 rpm, continues all the way through to redline and become fully realized in the 6000 rpm range. IPD performance gains stay above both factory power curves throughout the entire rev range.
Superior and more efficient design over the factory intake.
The IPD Plenums are products of efficiency that simply improve intake air flow and increase air velocity. The “Y” shape design and dimpled interior surface make air flow more laminar (less turbulent) dramatically improving power and torque across the entire RPM band. Smoother more optimized intake air flow will improve the performance of any engines. The more efficiently an engine breaths, the more efficiently it produces power.
Deliver impressive power gains regardless of modifications.
The superior design of the IPD Plenums optimize flow while increasing air velocity. Period! This applies to any Porsche engine, producing any level of power. The patented “Y” design delivers impressive performance gains for both bone-stock and highly modified Porsches. The more efficient design of the IPD Plenum will always outperform the factory air distributor. The factory intake will become even more detrimental to performance as your increase the power and torque outputs. The bigger the power, the better the IPD Plenum performs.
Produce substantial gains for both turbo and NA applications.
The Plenums always deliver considerable gains on both turbo AND naturally aspirated engines. It's a fact that the Turbo Plenums do produce more power than the NA Plenums. But the Turbo engines also produce more power. The fact is that the percentage gains of the different Plenum applications are actually almost identical, around 8-10% depending on the specific model.
Do not require an ECU flash and will not cause a CEL.
IPD Plenums should never cause a CEL or require an ECU Flash. If a Plenum is installed correctly there should be no fault codes or running issues, only solid performance gains across the entire RPM band. The only issue that could possibly arise is the need for a new MAF sensor if you already have a degraded sensor or perform a TB adaptation. There is absolutely no need to re-flash your ECU after installing an IPD Plenum, Period! Although any reputable Porsche tuner could further optimize an ECU program to achieve even greater performance gains with the Plenum installed.
Aluminum Plenums run cooler and don't suffer from heat soak.
The Aluminum Plenums do NOT experience heat soak under driving or racing conditions. It is true that aluminum has a higher thermal conductivity than plastic. In fact, aluminum is 650 times more thermally conductive than plastic and has a specific heat capacity that is 550 times higher than plastic. This means the aluminum Plenum actually spreads the energy it's exposed to 656 times faster than the plastic and can store more than 550 times the amount of energy per unit mass. Bottom line, aluminum can absorb more heat than plastic, but it also takes considerably more energy to heat up and it's losing that energy way faster than the aluminum allowing the IPD Plenum to remain cooler from outside ambient air under driving conditions, ultimately improving engine performance over plastic. Plus, why would Porsche utilize aluminum intakes on GT3's, GT2's, Cup Cars and Cup R's?
NOTE: If you are upgrading your throttle body along with the IPD Plenum, you may need to visit a dealership to have them perform a manual throttle body adaptation process. Some customers have reported that installing the throttle body and plenum while the battery is disconnected results in the car performing an adaptation check once the battery is reconnected, alleviating the need to visit a dealership. However, Fabspeed recommends having the adaptation performed at a certified dealership for optimal results. If you need a recommendation for a dealership in your area, please contact us.
XperTune Performance Software
Achieve maximum power gains and drivability without sacrificing reliability. Fabspeed Motorsport offers an alternative tuning method for vehicles equipped with ECU's that traditionally required bench flashing. No longer do you need to remove your ECU and mail it in for a tune. The Handheld device interfaces with the OBD-II port in your vehicle and your computer to complete the tuning process. Simply flash your 987.2 Boxster and Cayman with a Fabspeed ECU Tune utilizing the included handheld tuner. Performance ECU software upgrade improves horsepower, torque, and driving characteristics by reprogramming various sensor inputs, air/fuel ratios, and boost pressure (if applicable).
No need to send your ECU in to return to stock - simply use the Handheld to flash back, then to your Fabspeed XperTune again at any point!
DOES MY CAR HAVE “PSE”?
The Porsche Sport Exhaust – better known as PSE – was a factory option available on many late model Porsches. You can quickly and easily determine if your vehicle is equipped with PSE by taking a look at your center console. If your console has a button on it with an “exhaust tip” icon (see photo), then your vehicle is equipped with PSE, and you should select the PSE option when adding this product to your cart. If you do not see this button, the your vehicle does not have PSE and you should select the standard exhaust option when checking out.
To RETURN any system, product or merchandise you must contact us first for a Return Authorization (RA) Number. Special order and custom made systems, apparel, Carbon Fiber Wall Art, and other certain merchandise are NOT returnable. ALL SALES ARE FINAL. To return a Fabspeed Motorsport product an RA number must be requested and if granted the item(S) must be in original Fabspeed Motorsport sealed packaging. A copy of the original invoice and a brief explanation must accompany all returned items. You must follow our instructions for returning items carefully, or Fabspeed Motorsport reserves the right to charge a 25% restocking fee on any OPENED box or repackaged products. Customers are responsible for return shipping charges. If an order was shipped with a promotional “Free Shipping”, and the order is returned, we exclusively reserve the right to charge the customer or distributor for the cost of that original shipping and handling. If a Fabspeed Motorsport Performance package is ordered, and an individual component of that package is returned, Fabspeed Motorsport reserves the right to charge back the performance package discount along with any additionally offered discounts. Return shipped items DAMAGED in transit will RESULT in additional charges up to and including rejection of the competent. It is the customer’s responsibility to ship safely and properly. No returns accepted after 30 days from the invoice date. No credits will be given after 30 days from the invoice date.
To qualify for return, the product must be unused and remain in the original packaging, as well as match the current design and packaging for the product at the time of return. Sounds is subjective and therefore does not qualify for a return of a used product. See Sound Solution Guarantee to see if your product is covered.
Periodically mistakes are made when ordering, or a wrong part is shipped, and you may wish to return an item. We will do everything reasonable to satisfy you. Please contact Fabspeed Motorsport immediately via email at firstname.lastname@example.org to discuss the circumstances before returning any products. Anything returned without prior authorization from Fabspeed Motorsport will be refused. All returns must be sent back fully prepaid. Our customer service department (service@Fabspeed.com) will issue a Return Authorization Number, which must accompany any return. A copy of the original invoice and a brief explanation must accompany all returned items. No returns accepted after 30 days from the invoice date. No credits given after 30 days.
Fabspeed Motorsport cannot be held liable for refusal of, delay of, loss of, theft or damage to a shipment of any item. The customer agrees to indemnify Fabspeed Motorsport for all costs, fees and expenses Fabspeed Motorsport incurs as a result of any violation of any local, state, federal, national or international laws or regulations. Customer agrees to take responsibility for lost packages that were not independently insured or sent without requiring signature. The customer understands they will be liable in the event of additional fees, tariffs, or legal issues such as border seizure. Customer accepts these risks and agrees to release Fabspeed Motorsport of all liability.
Fabspeed Motorsport reserves the right to charge a shipping and handling fee on every order being shipped from our facility. This fee is universal and applies to all retail and wholesale purchases and cannot be waived or credited.
A 6% sales tax will be implemented for every purchase made by a Pennsylvania resident. This fee will be charged for in-house installations and products purchased online, over the phone, and/or via email, this fee is required by law, is non-negotiable and non-refundable.