The Eventuri intake for the Chevrolet Corvette C8 sets a new benchmark on this platform for the highest performing intake and the largest internal volume available* (Intake size and shape restricted by the OEM trunk panel, we redesigned it to allow for a...

Presenting the perfect addition to our X5M, XM intake system to optimize the flow path all the way to the turbos. Our carbon inlets have a larger volume than the stock inlets by maintaining a larger diameter all the way to the turbos. The stock inlets...

Presenting the perfect addition to our X5M / X6M intake system to optimize the flow path all the way to the turbos. Our Eventuri F9X X5M / X6M Pre-LCI Carbon Turbo Inlet Set have a larger volume than the stock inlets by maintaining a larger diameter all...

Eventuri BMW B58 Carbon Engine cover. BMW Roundel not included, this can be swapped over from your factory engine cover.  Supported Models F22 M240i F30 M340i F32 440i F36 440i ** This item is not eligible for return **

Eventuri has produced the BMW N55 engine for the F87 M2 made in 100% prepreg carbon fibre. The M2 version uses the metal M Power strip from the OEM engine cover, and has to be manually migrated onto the Eventuri carbon engine cover.  Emblems are...

Eventuri updated N55 intake system is a perfect example of their “Complete System” principal. It demonstrates the perfect balance between allowing for unrestricted airflow to their Venturi housing and cold air saturation with their scoop and...

Our intake has been independently tested by a US tuner on a Supra with downpipe and tune. The tests were done back to back on the same day with only the airbox being changed for our intake system. As can be seen there is a performance gain for a large...

Carbon fiber replacements for the OEM mirror covers. These perfectly accent the other OEM carbon fiber parts on the car like the roof or mirrors. We use the same OEM style weave of carbon fiber and gloss finish. Check out the rest of our product suite...

Fits the McLaren 570s, 540c and the 570GT The McLaren 540 and 570 Carbon Fiber GT Style Rear Spoiler Wing - Includes required brackets and hardware This item is constructed as replacement part and is designed to install in the factory location with no...

BMW F13 M6 The F12/F13/F06 M6 intake system was developed through extensive dyno testing, maximum velocity tests and flow optimisation. We have developed a complete system from front air scoops to filter housings and even inlet tubes to the turbos. The...

AUDI B9 S4 S5 Performance Gain: 13-17hp, 15-20ft-lbV-Box Acceleration : 60-130mph Reduced By 0.5 Seconds The Audi B9 S4/S5 Eventuri intake was developed to give less restrictive airflow to the turbo whilst maintaining low inlet temperatures. The S5/S4...

BMW F90 M5 V2 Acceleration Time : 60-130mph Reduced By 0.22 secondsMax Flow Rate Per Airbox at 28″ H2O: Stock 620 CFM, Eventuri 736 CFM The F90 M5 Eventuri intake system was developed through extensive real world testing and airflow simulation...

BMW E60 M5 / E63 M6 Performance Gain: 12-15hp, 12-18ft-lb The E60/E63 M5/M6 intake system is designed to make a positive impact for the whole driving experience. By taking advantage of aerodynamic principles and using computational fluid dynamics to...

BMW E39 M5 Performance Gain: 8-12hp, 8-10ft-lb The BMW E39 M5 Eventuri intake is designed to offer a complete solution as an upgrade to the stock airbox system. Our aim was to develop an intake system for the S62 engine which worked with the stock ECU...

BMW B58 M140I M240I - Black Carbon Intake Performance Increase : 12-15hp, 14-18ft-lb The B58 Eventuri intake system is another example of our “Complete System” principal. It demonstrates the perfect balance between allowing for unrestricted...

Fits facelift (2018+) models - Fits RS3 8V (2018+)  2.5T With the 8V RS3 Gen 2 and TTRS 8S platforms being widely used for high power builds, Eventuri have developed a groundbreaking intake system to support even those exceeding the 1000whp...

AUDI 8V S3 Performance Increase : 16-25hp, 15-22ft-lb The VAG 2.0 TFSi Eventuri intake has been developed to provide the most efficient and direct airflow path to the turbo. By replacing the OEM our Patent Pending Venturi housing and coupling this with...

AUDI 8V GEN-2 RS3 TTRS Performance Gain: 15-18hp, 19-23ft-lbV-Box Acceleration : 60-130mph Reduced By 0.3 Seconds The Audi 8V RS3/TTRS Eventuri intake sets a new benchmark in aftermarket intake design for this platform. It was developed to achieve two...

AUDI B9 RS4 RS5 Performance Gain: 11-16hp, 12-17ft-lb At The Wheels The Audi B9 RS4/RS5 Eventuri intake was developed to give less restrictive airflow to the turbo whilst maintaining low inlet temperatures. The RS5/RS4 engine bay becomes heat soaked...

AUDI B8 S4/S5 3.0TFSI Performance Gain: 17-22hp, 30-34ft-lb The Audi S4/S5 3.0T Eventuri intake was developed to give less restrictive airflow to the supercharger whilst maintaining low inlet temperatures. The S5/S4 engine bay becomes heat soaked very...