For customers who already own the G8X Eventuri V1 Carbon Intake System and want to install the CSL strut brace. Intake System Installation Guide Retrofit kit consists of: Main Carbon Intake Tube Left-Side Intake Housing without Filter

The X3 M40i Eventuri intake has been developed to provide the turbo with a less restrictive flow path whilst maintaining low inlet temperatures. In the M40i, the intake system’s proximity to the exhaust manifold poses a challenge, rapidly heating...

Introducing our Lotus Emira V6 Supercharged intake. This intake is the result of extensive R&D and testing to improve on the flow path of the stock system. Our system is a complete redesign of the stock airbox with the aim of reducing the resistance...

Introducing our cold air scoops for the G8x M3 and M4 platform. Fitment for all G8x M3 and M4 vehicles with both stock and CSL grills. These scoops are designed to direct ambient air into the feeds for the intake system helping to maintain consistent...

Introducing the Eventuri C8 Z06 Carbon Fiber Intake system with clear cover for your Chevrolet C8 Corvette Z06. This direct replacement system features double Venturi Housings for the largest intake by internal volume on the market.   Air flow...

Introducing our revised G8X M3 / M4 intake for fitment with the CSL Strut brace. We have carried out intensive R&D to develop an intake which not only improves on the stock M2/M3/M4 but also is future proof in its capacity to cater for high powered...

The 991 Turbo Eventuri intake system was developed through extensive real world testing with the aim of allowing the turbos to work more efficiently. By replacing the single stock airbox with individual patented Venturi filter housings, the turbos are...

The Mercedes GLC63 intake system is the culmination of extensive development and testing. Our design brief consisted of 3 main objectives: 1) Increased flow rate. 2) Low intake temperatures. 3) Smooth airflow. The first objective was met by utilizing all...

Mercedes W205 C63S AMG - Carbon Fiber duct upgrade kit to change your V1 intake system to V2.  Note: Intake system not included ** This item is not eligible for return **

The Mercedes W205 C63S AMG intake system is the culmination of extensive development and testing. Our design brief consisted of 3 main objectives: 1) Increased flow rate. 2) Low intake temperatures. 3) Smooth airflow. The first objective was met by...

The F40 M135i, F44 M235i, F39 X2 35i Eventuri intake system was developed through extensive real world testing and airflow simulation analysis. It features our patented Venturi housing system with an integrated Mass Air Flow sensor section for the...

The E85 / E86 Z4M Eventuri intake system uses theri Patent Pending Carbon fibre Housing which provides an aerodynamically efficient airflow path from the filter to the MAF tube. Not just another cone filter with a heat shield but a unique design which...

The Eventuri panel filters are made using the same design philosophy of their full carbon fiber intake systems: cutting edge design, rigorous testing and prototyping methods. With a focus on performance, each design undergoes CFD analysis and is then...

The X3M/X4M intake setup from BMW although awkard at first sight, is a very well designed system in the given space available. The flow path from the filters to the turbo inlets is very direct and does not change direction as abruptly as the usual OEM...

Carbon shroud set for the Eventuri F90 M5 V1 intake system. Kit includes both left and right shrouds.  These Carbon shrouds are a recent addition to the V1 intake system. They seal the openings in front of the filter housings from the engine bay...

Your BMW’s interior is just as important as its exterior, which is why we bring so many impeccable interior parts to you. Make your BMW’s seats stand out with these unique Eventuri Pre-preg Carbon Fiber Seat Back Covers. For Carbon Fiber...

The F8X M3/M4 intake system is one of our most ambitious intake systems to date. Now in the updated V2 design, it features sealed filter housings to maintain a more steady IAT, even while stationary. The new ducts which seal the housings, coupled with...

The Eventuri panel filters are made using the same design philosophy of their full carbon fiber intake systems: cutting edge design, rigorous testing and prototyping methods. With a focus on performance, each design undergoes CFD analysis and is then...

Carbon Intake Duct With Shield upgrade for those with the Eventuri Version 1 Intake System The filter housing is positioned with its opening sealed against this new carbon duct. This carbon duct has been designed to fit over the stock cold air duct...

Eventuri BMW N55 Carbon Engine cover Supported Models F22 M235i F30 335i F34 335i F32 435i F33 435i F36 435i  ** This item is not eligible for return **