Ditch the restrictive factory over axle pipes to increase power, save weight and add a throatier more aggressive tone. Just like the regular GT4, our Over Axles are a perfect first mod. Our design process started with 3D scanning the entire exhaust system using our CREAFORM 700 Handscan so that we could make a complete Solidworks 3D model of the exhaust. We then designed the exhaust and fixtures using that model so that the exhaust fit perfectly to OEM standards. We use mandrel bent T304 stainless steel tubing that’s 40% larger than factory for maximum flow. The heat shielding has a stainless steel shell, with a ceramic fiber core that can handle a continuous 2400 degrees fahrenheit and is an extremely effective insulator.
These Over Axle Link Pipes will bring out a stronger throatier tone from your GT4 RS. The difference in volume and tone is quite significant.
With an otherwise stock exhaust and no tune, we gained 30 HP at 4750 RPM and 34 ft/lbs of TQ at 4750 RPM. That's a gain of 33 HP at the crank! Peak horsepower also increased from our baseline of 456 WHP to 474 WHP and from 330 ft/lbs of TQ to 341 ft/lbs of TQ. See our dyno graph above for more details.
PURCHASE DISCLAIMER: Fabspeed Motorsport does not condone the use of emission defeat devices for any vehicles used on public streets or roadways. Fabspeed Motorsport will not tamper, remove, disable, or bypass emissions equipment on a motor vehicle in accordance with 40 CFR Section 86.1854.12(a)(3), Clean Air Act 40 CFR 1068.101(b). This includes software, known as tunes, that reprogram a motor vehicles electronic control module to alter engine performance and enable the removal of filters, catalysts, and other critical emissions controls.
Sport Catalytic Converter (STREET) - This product removes the OEM catalytic converters from the vehicle, and as such, is strictly intended for closed track events and off-road use only. This product contains a High-Flow Sport Catalytic Converter solely intended for track and race cars as it is NOT California Air Resources Board Certified and not EPA certified. You are hereby informed and warned to check your local, state, and federal laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts.
To RETURN any system, product or merchandise you must contact us first for a Return Authorization (RA) Number. Special order and custom made systems, apparel, Carbon Fiber Wall Art, and other certain merchandise are NOT returnable. ALL SALES ARE FINAL. To return a Fabspeed Motorsport product an RA number must be requested and if granted the item(S) must be in original Fabspeed Motorsport sealed packaging. A copy of the original invoice and a brief explanation must accompany all returned items. You must follow our instructions for returning items carefully, or Fabspeed Motorsport reserves the right to charge a 25% restocking fee on any OPENED box or repackaged products. Customers are responsible for return shipping charges. If an order was shipped with a promotional “Free Shipping”, and the order is returned, we exclusively reserve the right to charge the customer or distributor for the cost of that original shipping and handling. If a Fabspeed Motorsport Performance package is ordered, and an individual component of that package is returned, Fabspeed Motorsport reserves the right to charge back the performance package discount along with any additionally offered discounts. Return shipped items DAMAGED in transit will RESULT in additional charges up to and including rejection of the competent. It is the customer’s responsibility to ship safely and properly. No returns accepted after 30 days from the invoice date. No credits will be given after 30 days from the invoice date.
To qualify for return, the product must be unused and remain in the original packaging, as well as match the current design and packaging for the product at the time of return. Sounds is subjective and therefore does not qualify for a return of a used product. See Sound Solution Guarantee to see if your product is covered.
Periodically mistakes are made when ordering, or a wrong part is shipped, and you may wish to return an item. We will do everything reasonable to satisfy you. Please contact Fabspeed Motorsport immediately via email at firstname.lastname@example.org to discuss the circumstances before returning any products. Anything returned without prior authorization from Fabspeed Motorsport will be refused. All returns must be sent back fully prepaid. Our customer service department (service@Fabspeed.com) will issue a Return Authorization Number, which must accompany any return. A copy of the original invoice and a brief explanation must accompany all returned items. No returns accepted after 30 days from the invoice date. No credits given after 30 days.
Fabspeed Motorsport cannot be held liable for refusal of, delay of, loss of, theft or damage to a shipment of any item. The customer agrees to indemnify Fabspeed Motorsport for all costs, fees and expenses Fabspeed Motorsport incurs as a result of any violation of any local, state, federal, national or international laws or regulations. Customer agrees to take responsibility for lost packages that were not independently insured or sent without requiring signature. The customer understands they will be liable in the event of additional fees, tariffs, or legal issues such as border seizure. Customer accepts these risks and agrees to release Fabspeed Motorsport of all liability.
Fabspeed Motorsport reserves the right to charge a shipping and handling fee on every order being shipped from our facility. This fee is universal and applies to all retail and wholesale purchases and cannot be waived or credited.
A 6% sales tax will be implemented for every purchase made by a Pennsylvania resident. This fee will be charged for in-house installations and products purchased online, over the phone, and/or via email, this fee is required by law, is non-negotiable and non-refundable.